HOMEPAGE
Door Hardware
Window Hardware
  • Double Hung Sash Hardware
  • Casement Window Hardware
  • Transom Window Hardware
   - Hinges & Pivots
   - Latches & Bolts
   - Operators
   - Transom Chains
   - Hooks & Hook Rests
  • Screen, Storm Sash & Shutter Hardware
  • Curtains / Shades Hardware
Cabinet Hardware
Everything Else
HARDWARE BUYERS BEWARE!!
OUR WARRANTEE
SHIPPING INFORMATION
ORDERING INFORMATION
CHECKOUT
VIEW CART
Window Hardware > Transom Window Hardware > Hinges & Pivots
TRANSOM HINGES
Hinges that are positioned horizontally should be “Fast Pin” butts so that the pins will not work their way loose as the window is opened and closed.


Pivots for 1-3/8" Sash
WTP-71-3/8
Sargent #BJ71,
Friction Pivots,
UNUSED ORIGINALS,
Cast Iron,
Original Gloss Black Japan Finish with a refresher top coat.
1 Pair Available for 1-3/8" sash,
All screws included
Installation instructions included.

TEMPORARILY OUT OF STOCK.
These are adjustable spring loaded pivots. They have detents to hold sash open at 30, 60 & 90 degrees.

Measurments:
3-3/4" x 1-3/8" each leaf


Quantity

Reading Hdw., 1-3/4" Sash
WTP-40-3
"Reading Hardware Co. #40
UNUSED ORIGINALS
Cast Iron
Dull Copper Plate
For 1-3/4"" Sash
All Necessary Fastenings Included
1 pair available

These DO NOT have detents to keep them open in the wind but they DO stop at 90 degrees."

Measurments:
3-1/2" x 1-1/2" x 1/2"


Pair
$85.00
Quantity

Russwin for 2-1/8" Sash
WTP-302
Russwin #302-1/2
UNUSED ORIGINALS
Cast Brass
For 2-1/8"" Sash
All Necessary Fastenings Included
1 pair available

These DO NOT have detents to hold them open at angles.

Measurments:
4-1/4" x 2-1/8" x 1/2"


Pair
$85.00
Quantity

Reading Hdw. For 1-1/4" Sash
WTP-1127
Unknown Maker but Marked "01305"
(Listed in the 1923 Reading Hardware Catalogue as #P1127)
UNUSED ORIGINALS
Cast Bronze
For 1-1/4"" Sash
All Necessary Fastenings Included
2 Pair Available

These light-weight pivots DO NOT have detents to keep them open.

Measurments:
3-7/8" x 1-3/16" x 11/16"


Pair
$75.00
Quantity



Sash Pivot for 1-3/8" Sash
WTP-744
Sash Pivot
Unknown Maker Labeled # 744. Possibly Monarch
Unused Originals
Cast Iron with slight surface rust

Spring Loaded

Holds Open at 45 degrees and 90 degrees

2 pairs available

Installation similar to sargent BJ-71

Measurments:
Overall: 4” x 5/8” x 1-1/2”

Marked for 1-3/8” sashes but actually measure 1-1/2” wide


each pair
$95.00
Quantity


Bronze 2-3/16" Sash Pivot
WTP-1991
Sash Pivot
Unknown Maker
Cast Bronze
Restored originals

Spring loaded
Holds open at 90 degrees

All necessary fasteners are included

1 pair available

Measurments:
Overall: 4” x 2-3/16”


each pair
$85.00
Quantity

Bronze 1-3/4" Sash Pivot
WTP-134
Sash Pivot
Unknown Maker
Cast Bronze
Restored originals

Holds open at 90 degrees
All necessary fasteners are included

1 pair available

Measurments:
Overall: 4” x 1-7/8”

Marked for 1-3/4” sashes but measures 1-7/8” wide


each pair
$85.00
Quantity
Wm. J. Rigby Co.
73 Elm Street
Cooperstown, NY 13326
607-547-1900
askbill@wmjrigby.com
Site design by: Hand & Hand Multimedia